Industrial closures for warehouses, workshops and logistics sites
Shasama Fermetures supports warehouse operators, workshops, logistics docks and professional sites in choosing the right industrial closure: insulated sectional door, large industrial metal curtain, rapid flexible door or industrial gate. The survey confirms the opening, traffic flows, motorisation, safety devices and free quote before manufacture or intervention.
Approved French manufacturePreparation with a Francilien workshop according to the measured opening and selected configuration.
24 years of experienceEstablished expertise in professional access systems.
Free quoteA detailed proposal before you commit.
24h/7j emergency responseA direct route for an immobilised access.
Four closures for four industrial needs
The right system starts with the operating decision: insulating a bay, coiling a reinforced closure, speeding up internal flows or controlling perimeter access.
Industrial door
Industrial sectional door
The industrial sectional door closes the bay with sandwich panels, a lift type suited to the building and an operator selected for the usage level. It is the primary solution for warehouses, workshops and docks that need a rigid closure with thermal control.
Best for
Heated or cold warehouses, workshops and logistics bays
Main strength
Sandwich-panel insulation and rigid sectional closure
Trade-off
Requires suitable headroom, a track path and maintained lifting system
The large industrial metal curtain combines a reinforced curtain body, guides, shaft and industrial drive to close a large opening with compact vertical coiling. Sizing remains study-led around the bay, usage and expected loads.
Best for
Large spans, warehouses and technical industrial access points
Main strength
Compact coiling and reinforcement for large dimensions
Trade-off
Less thermal control than sandwich panels; survey-led sizing is required
The rapid flexible door separates flows with a flexible curtain, variable-speed drive and detection suited to the passage. It reduces open time in logistics, production, hygiene or cold areas without replacing a rigid anti-intrusion closure.
Best for
Logistics, production, hygiene and cold areas
Main strength
Speed, cadence and possible post-impact reinsertion depending on model
Trade-off
Flow separator, not a rigid anti-intrusion closure
The industrial gate controls exterior site access with a sliding, cantilever or swing architecture, motorisation and control devices. It organises vehicle and pedestrian flows at the perimeter rather than thermally closing a building bay.
Best for
Site entrances, vehicle access and controlled pedestrian flows
Main strength
Exterior access control with three installation architectures
Trade-off
Does not close or thermally isolate a building bay
Installation, repair and motorisation for industrial access
Industrial access out of service
A technician can diagnose an immobilised industrial sectional door, secure the access and organise return to service according to the site configuration.
The five published services below currently cover industrial sectional doors: installation, emergency repair, motorisation, repair and maintenance. For a rapid door, industrial curtain or gate, the path starts with the project quote.
We check the opening, structure, clearances, passages, cadence and ambient conditions.
Configuration and quote
The product, dimensions, motorisation, controls, safety devices and finish are detailed in a free proposal.
Manufacture and commissioning
The closure is prepared through a French/Francilien supply route, installed, tested and explained to the team before operation.
Free quote after survey
The price of an industrial closure depends on the site and selected configuration. We prepare a free quote after survey, with no generic price displayed on this pillar.
Factors that shape the quote
The survey allows the right equipment to be selected and avoids reducing the comparison to the opening size alone.
Which industrial closure should be chosen for a warehouse or workshop?
The choice depends on the job: sectional door to insulate a bay, large industrial metal curtain for compact reinforced closure, rapid flexible door to speed up flows, industrial gate to control exterior access. The survey confirms structure, clearances, cadence and safety devices.
Industrial sectional door or industrial metal curtain: what is the difference?
The sectional door uses sandwich panels and a track path to improve rigid closure and thermal control of a bay. The industrial metal curtain coils compactly and suits reinforced large openings, with more limited thermal performance.
When is a rapid flexible door appropriate?
It is appropriate when passage cadence, zone separation, hygiene or limiting air exchange between spaces is the priority. It is sized with the detection devices, controls and real site environment.
Is a rapid door an anti-intrusion closure?
No. A rapid flexible door is primarily a flow separator. For rigid or anti-intrusion closure, an industrial sectional door, large industrial metal curtain or another bay-specific solution should be assessed.
Should an industrial gate be sliding, cantilever or swing?
The choice depends on width, ground conditions, available runback, traffic frequency and safety zones. Sliding suits linear access, cantilever reduces ground constraints, and swing depends on the available leaf travel area.
How are motorisation and daily cadence sized?
The operator is selected after checking weight, dimensions, traffic, control type and operating conditions. The quote specifies the motor, controls and safety devices selected for the expected use.
Which EN standards and user-safety devices apply?
Motorised closures are assessed against applicable requirements, including EN 13241, CE marking, emergency stop where needed, photocells, safety edges, warning light or signalling according to the configuration. Exact devices are validated after site analysis.
What determines price, maintenance, warranty and lead time?
The quote depends on dimensions, selected product, insulation, cadence, motorisation, controls, safety devices, finishes, preparatory works, site access and manufacturing lead time. Maintenance and warranty are specified in the proposal.
Verified reviews
Google customer reviews
Real customer feedback, verified by Google, on our repair, installation, and automation work in Paris and Île-de-France.
Très bonne société ! Intervention de nuit pour un dépannage de rideau métallique, rapide et efficace. Prix très correct, travail sérieux et professionnel. Le technicien était super gentil et agréable. Je recommande vivement cette société ! ⭐⭐⭐⭐⭐
2MS Bat
Très bonne expérience notre rideau métallique est tombé en panne ce matin et l’équipe est intervenue très rapidement. Travail sérieux propre et efficace. Merci pour votre réactivité et votre professionnalisme je recommande vivement cette entreprise !
Ked Fays
J'ai travaillé pas mal de fois avec cette société Shasama Fermetures pour pose des rideaux métallique. Ils font toujours des bons prix .
Équipe professionnel je recommande fortement !
Wimal Chell
J’ai fait un appel à la société Shasama Fermetures .
Ils ont venu rapidement , pour réparer mon Rideaux Metalique
Au centre commercial, Creteil Soleil
Je suis très satisfait, je recommande cette société
J S
電子シャッターの修理をお願いしました。
とても親切で迅速に仕事をしてくれました。
Famille Piqueras
Le remplacement des Poulis c’est passé sans problème avec une intervention expresse. Les réglages ont été fait avec des solutions efficaces. Si vous avez des stores à poser ou rénover, je recommande cette équipe. Encore merci.
Meister Athis
Excellent service, rapide et efficace pour la reparation de mon rideau métallique je recommande fortement
Nepveu Caroline
Efficace et très on Time.
Intervention le dimanche pour un déblocage de rideau métallique
Maïssa Mehdaoui
La société shasama est intervenue pour réparer ma porte sectionelle, Ce qu’ils ont fait avec brio.
Nous sommes entièrement satisfaits de leur intervention, le monsieur était très agréable et très professionnel.
Xavier F
Rapidité de l’intervention, technicien agréable, coût élevé qui peut se justifier par la demande urgente. Travail fait dans la journée
Oussama Larbés
Société très sérieuse et ponctuelle c’est déplacé pour une porte sectionnelle un jour férié le 14 juillet m’a réglé le problème en moins d’une heure. J’ai j’ai insisté pour avoir le Réglages
que j’avais auparavant. Ça ne les a pas dérangé de recommencer plusieurs fois. Je recommande de très bons techniciens. Très bonne société.
Maxime Cognard
Intervention rapide, professionnel.
K.
intervention. rapide et travail excellent par l equipe, que je vous recommandé !pour un. volet roulant
Mutlu Kaya
Excellent travail hyper rapide pour réparations de rideaux métalliques
Mar mar75
Très satisfaite de l'installation de mes stores extérieurs. L'équipe a fait preuve d'un grand professionnalisme, tout en étant respectueuse des lieux et attentive aux quelques consignes que je lui avais transmises. Pour le reste, son savoir-faire a fait la différence.
Malgré un carnet de commandes particulièrement chargé en cette période de canicule, elle a su être réactive. Le travail est soigné, de qualité, et le résultat est conforme à mes attentes.
Je recommande cette entreprise sans hésitation. Merci Sofiane
Rapid response
Need an intervention?
An operator on the line, a technician at your door. Available 24/7.