Why choose Solid-slat metal curtain?
A closure designed around your needs
The solid-slat curtain closes the opening with a continuous metal curtain body and completely conceals the premises. After the survey, our teams adapt the operating system, guides and locks to the opening to create a closure that is easy to understand and suited to everyday use.
What makes this model different
- Anti-break-in & anti-vandalism
- 100% blackout — total privacy
- High-resistance galvanised steel
- Weather shield — wind, rain, dust
- Industrial durability — minimal maintenance
This model is right for you if
Choose solid slats when blackout, premises privacy and a continuous closure are the priorities.
- Street-level shops
- Total blackout
- Warehouses and garages
- Sites requiring privacy
Consider another solution if
Compare micro-perforated, polycarbonate or Cobra models when the display, light or ventilation must remain visible.
Security designed for its use
The continuous solid-slat curtain body conceals the interior and places a metal closure across the full opening. Lower locking, anchoring and reinforced guidance address exposed points; user-safety measures are then specified for every motorised version according to circulation and the chosen control method.
Projects
Not sure? Have a question? Our experts are here to help. Call us on 01 87 66 40 33.
Options and configurations
Operation type
Manual direct-pull
Direct manual operation, suited to small widths
Best suited if: Recommended when the opening and usage allow the curtain body to be lifted directly and comfortably.
Manual winch
Crank operation for medium widths
Best suited if: Recommended when crank assistance is sufficient for the planned openings.
Motorised
Tubular, central or side motor depending on dimensions
Best suited if: Recommended for frequent use or a curtain body that requires regular assistance.
Control type
Push button
Wired up / down control
Best suited if: Recommended for fixed control from inside the premises.
Remote control
Radio, several transmitters possible
Best suited if: Recommended when several responsible users need to operate the curtain remotely.
Key switch
Key contact with manual override
Best suited if: Recommended when facade-side control must remain restricted to authorised users.
Keypad
Code opening, no key required
Best suited if: Recommended for sharing access without multiplying keys.
Enhanced security
Multipoint lock
Reinforced locking on the bottom slat
Best suited if: Recommended when the lower closure needs several restraint points.
Floor anchor shoe
Anti-tear reinforcement at floor level
Best suited if: Recommended when the threshold can strengthen the curtain body with a floor anchor.
Bottom-slat angle bar
Anti-lift reinforcement at the base of the curtain
Best suited if: Recommended when the lower edge is particularly exposed to lifting attempts.
Safety edge
Sensitive anti-crushing edge, with motorisation
Best suited if: Recommended on a motorised version when the closing area is frequently used.
Accessories
Reinforced guide rails
Reinforced lateral guidance
Best suited if: Recommended when lateral retention of the curtain body needs strengthening.
Protective box
Steel casing protecting the axle and coil
Best suited if: Recommended to protect the axle and integrate the coil neatly into the facade.
Bottom-slat seal
Air & dust sealing at the base of the curtain
Best suited if: Recommended when air and dust ingress at the threshold should be reduced.
Anti-noise end caps
Silent operation at the slat ends
Best suited if: Recommended to reduce friction noise in an occupied environment.
Intrusion-resistance measures
- Continuous solid-steel-slat curtain body across the full opening
- Multipoint lock and floor anchor shoe offered to reinforce locking at the threshold
- Bottom-slat angle bar and reinforced guide rails offered against lifting and lateral forces
- Reinforcement options that can target burglar-resistance levels CR3 to CR4 depending on the chosen configuration (performance confirmed on a per-project study)
User-safety measures
- Safety edge offered with motorisation to detect an obstacle at the closing edge
- Key switch with manual override offered to retain controlled operation
Understanding the quote
Every solid-slat curtain is made to measure: the quote is prepared after measurements and selection of the slats, operating system, safety measures and finish.
What the quote includes
- On-site measurement survey
- Made-to-measure curtain fabrication
- Installation by our teams
- Selected configuration and options itemised in the quote
- Custom-built, assembled and installed in the Paris region by our teams
- 2-year warranty
What affects the price
- Opening dimensions
- Solid slat type
- Operating system
- Safety and locking options
- Finish
- Site access
The on-site survey confirms supports, available space and installation conditions before the quote is approved.
Frequently asked questions about Solid-slat metal curtain
What is the difference between a solid-slat curtain and a micro-perforated one?
Solid slats black out the opening completely and fully conceal your premises, whereas micro-perforated slats let light and air through to keep the shopfront visible. Choose solid slats when privacy and 100% blackout are the priority.
Can a solid-slat curtain be motorised?
Yes. The curtain is available with manual or motorised operation. Consult our technicians for the motorisation and connectivity suited to your installation.
Is the curtain made to measure?
Yes. Every curtain is made to measure to the exact dimensions of your opening, then installed by our teams in Paris and across Île-de-France.
How do I maintain a solid-slat metal curtain?
The high-resistance galvanised steel is treated against corrosion and designed for intensive use with minimal maintenance: regular cleaning of the guide rails is enough to keep operation smooth.
How quickly do you respond if the curtain jams?
In the event of a breakdown or a jammed curtain, our teams respond within 20 minutes in Paris and across Île-de-France.
Which solid-slat profiles and thicknesses are available?
Compatible profiles and thicknesses are specified in the quote after the site survey, according to the opening dimensions and use of the premises.
Which motor suits the dimensions and frequency of use?
The motor is selected according to the curtain dimensions and operating frequency, then specified in the quote after the site survey.
Which safety and locking options should be specified?
The lock, anchoring, bottom-slat reinforcements and motorisation-related devices are selected for the site, then specified in the quote after the survey.
