Skip to main content
Shasama Fermetures
Sectional garage door shaft and torsion spring above the opening during replacement work
Installation

Sectional garage door replacement in Claye-Souilly (77)

4 photographs

Replacement of a sectional garage door with a new one on allée des Chrysanthèmes in Claye-Souilly (77): work above the opening on the shaft and torsion springs, new door in place.

Shasama Fermetures worked on allée des Chrysanthèmes, in Claye-Souilly, to replace a garage’s sectional door with a new one. The photographs follow the work above the opening, on the shaft and torsion springs, then show the new door open from outside and closed from inside.

Main viewTorsion spring mounted on the sectional garage door shaft at garage ceiling level

What was carried out on site

  • Remove the garage’s old sectional door
  • Fit the new sectional door
  • Work above the opening on the shaft and torsion springs
  • Run the new door through opening and closing

Intervention facts

Location
Claye-Souilly · Claye-Souilly (77)
Closure type
Sectional garage door
Specific intervention
Replacement of a sectional garage door with a new one.
Client profile
Private garage
What we did
Replacement of a sectional garage door with a new one on allée des Chrysanthèmes in Claye-Souilly (77): work above the opening on the shaft and torsion springs, new door in place.
Project category
Installation
Project photos
4 photographs

From inspection to return to service

This sequence describes our working method for this type of intervention. Job-specific operations are listed separately when they have been confirmed.

  1. Inspect and diagnose

    Review the closure, its sticking points and the site constraints before any action is taken.

  2. Work methodically

    Carry out the agreed actions with a protected work area suited to the equipment.

  3. Adjust the components

    Check alignment, guides and the settings needed for smooth, regular travel.

  4. Test the closure

    Check movement, stops and overall behaviour before returning the access.

The matching service, explained step by step: Garage door installation

All our work on this type of closure: Residential doors

What to monitor afterwards

After installation, the first operating cycles provide useful reference points for alignment and consistency.

  • Visually check that the guides stay clear and the curtain lowers without drifting.
  • Avoid impacts and deposits at the foot of the closure, especially during the initial handover period.
  • Request an inspection if play, rubbing or a change in travel appears.

Project report

4 captioned on-site photographs

View 3 of 4New sectional garage door raised, seen from outside the garage after replacement
View 4 of 4New sectional garage door closed below the torsion springs and the ceiling-mounted motor
Nearby projects
SMS confirmation: a Shasama Fermetures technician is on the way
Rapid response

Need an intervention?

An operator on the line, a technician at your door. Available 24/7.

01 87 66 40 33Call usFree Quote